If you are looking for interesting and easily executable ideas for a center piece, then you can be very helpful to this article here.
Below you can see a wonderful example of exotic succulents and Tilliandsias. This was achieved by this piece of wood that I found in the woods.
Today I’;ll tell you how I did it.
Make a beautiful decoration made of drif2od himself
– Various pieces of drif2od (you have to choose those which can be well attached to a flat surface)
– Succulents (you could either small pots or cut plants use)
– Tillandsias (if you want)
Tools and safety gear
– Electric drill
– Wooden chopsticks and plastic
Before you begin, you should make a lot of peat moss in a bucket of water for 5 to 10 minutes. Discard the extra amount of water.
Position the various succulents on the drif2od, without need to remove it from the pot.
Only after you are sure that everything is in its right place, you can begin with the drilling.
Set the mixture for the pot or taper sleeves at the bottom of each hole
Carefully move the pots of succulents and make them go into the drilled holes
Then fill the cavities with more succulents
There are a few more empty spaces between the succulents and the earth
Carefully drop a peat moss and place the material in the right places with a chopstick
Carry on until the plants really sit securely and comfortably.
Then you can go even further with the peat moss down so that it is hidden.
After all this is done, you should irrigate the whole, to the drif2od is completely wet. A fertilization medium is not essential.
If the succulents are well fixed, you do not need more adhesive
Let us enter the end to the question of where and when you can use as an arranging. It fits on all type of decorative gardens inside and can be used in various festivals.